Nom | Description |
Cloisonne | After the pigment is filled into the badge according to the proportion, the enamel powder is melted at a high temperature of 800 degrees. |
Soft Enamel | Fill the paint color into the products. The surface is linear. |
Hard Enamel | Prepare a certain proportion of paint and other glues, fill them into the product, and polish the surface in the later stage to achieve the enamel effect. The surface is smooth. |
UV Print | Print a pattern on the surface(Suitable for more complex pattern colors or color gradients) |
Epoxy | A layer of transparent glue is added to the surface of the product to protect the product |
Glitter | Powder particles one by one to achieve a sparkling effect. There are many color options to try to match the Pantone color code. |
Glow | By absorbing light, the night can glow |
Transparent Color | The color is transparent and the bottom can be seen |
Pearlescent | Add pearl powder to paint |
Sand Face | The surface is like sand grains, one by one |
Cut Out | Cut out the product and move it to achieve a hollow effect |
Etch | The logo is corroded by the potion, which can only be used for thinner copper and stainless steel |
Laser | By laser the logo or lettering, only natural colors (gray) and black two colors |
Two-tone | The same product is electroplated in two colors |
3D/2D | Arc-shaped or multi-layer / product only has two layers of concave and convex |
Plating | The process of attaching a layer of the metal film to the surface of metal or other material parts by electrolysis. It can prevent corrosion, improve wear resistance, conductivity, and reflective properties and enhance appearance. |
Stained Glass | Cut out part of the pin and fill in the transparent color |
Gem | Set your pin with artificial diamonds (diamonds are available in a variety of colors) |
Hinge | The two-layer pin can be designed to open and close or rotate like a door |
Link Chain | The pin is inlaid with a chain so that multiple pins join into a movable whole |
Slide | Multi-layer design so that one or more layers can be moved over the bottom pin |
Multi-Layered Épingle en émail | A multi-tiered design with one layer of pins as the base and the rest on top |
Back stamp | Your words or logo on the back of the pin can be raised or concave |
LED Light | It can be add LED on the pin badge |